The cost alone for a projector replacement bulb would be enough motivation for projector
owners to look for ways to extend the life of their projector bulbs. Here is a list
of tips that can help ensure that you are getting the most out of your projector's lamp:
- Take careful consideration when configuring your projector into your home theater or
conference room setting. Ensure that there is plenty of space (typically two feet, but
consult your owner's manual for model-specific measurements) between the projector's
exhaust and intake fans and walls, ceilings, or enclosed compartments. Not following
your projector's guidelines will cause overheating to the unit which will cause lamp failure.
- Do not unplug your projector until after the lamp has properly cooled. After
switching your projector off, the fan may keep running for as long as five minutes
in order to cool the bulb evenly and guards against bulb failure.
- Avoid turning your projector unit on and off frequently during presentations.
Turning the power on causes a surge of energy to the lamp, exciting the bulb's filament.
Doing this multiple times in a short period of time causes stress on the filament and will
result in early failure of projector bulbs.
- Avoid moving your projector unit until the lamp has properly cooled. Hot bulbs are
extremely fragile and the vibration caused by movement can cause the lamp's filament to break.
- Always clean your projector's intake and exhaust filters every 3 - 6 months, depending on
how frequently it is used. Clogged filters do not vent heat properly, causing the projector to
overheat leading to lamp failure and the need for a replacement bulb.
- Utilize "low lamp" or "economy mode" functions whenever possible. These options allow
the lamp to run at a lower brightness, thus extending lamp life.
- For more general advice on caring for your projector, visit our resource on
Projector Care Tips To Ensure A Long Life For Your Projector.
Whether you use your projector for business presentations, for movie screenings at home, or any other use, save money by following
the tips above and making your LCD projector bulb life last. Constantly replacing the bulbs can end up costing a lot, so make sure to
get the most out of each bulb.
When it is time to replace a bulb, however, remember that our prices are some of the lowest you can find, and we offer free ground
shipping on all replacement lamp bulbs. We understand how expensive it can be to replace your bulbs constantly, so we provide the lowest
possible pricing. Oftentimes it is even lower than the manufacturers allow us to advertise.
We also have a wide selection of LCD projector bulbs and other types of lamps. Browse our products to find the lamp for your projector
and order your bulb online through our safe, secure, simple checkout process. No other presentation equipment store carries the same variety
of products at such low prices as PresentationMart.com, so remember us next time you're looking for a replacement bulb.
Don't forget, our customer service representatives are highly trained and knowledgeable, and can answer all of your questions. Whether you
have questions about specific products or want further information about how to extend your projector bulb life, they are friendly and willing
to help, so call today.
|
